Lifetime of living polymers in cationic polymerization. II. Living polymerization of isobutyl vinyl ether initiated by the hydrogen iodide/zinc halide systems

In the living cationic polymerization of isobutyl vinyl ether (IBVE) initiated by the hydrogen iodide/zinc halide (HI/ZnX₂; X = I, Br, Cl) systems, the concentration ([P^*]) of the living propagating species was determined by quenching with sodiomalonic ester ( 1 ). The quenching reaction was shown to be clean, instantaneous, and quantitative to give poly (IBVE) with a terminal malonate group from which [P^*] was obtained by ¹H-NMR spectroscopy. In the polymerizations in toluene below +25°C, [P^*] was constant and equal to the initial concentration ([HI]₀) of hydrogen iodide, independent of the type and concentrations of ZnX₂ as well as monomer conversion. At 0 and +25°C, however, the living species started decaying immediately after the complete consumption of monomer. In contrast, such a decay process was absent at ?15°C even in the absence of monomer until about an hour (depending on the conditions) after the end of polymerization. The deactivation reaction was first order in [P^*], and the lifetime (half-life) of the living species was longer at lower temperature and at lower ZnX₂ concentration. On the basis of these [P^*] and lifetime measurements, the HI/ZnX₂ systems were also compared with the HI/I₂ counterpart.     

ABNORMAL EMBRYONIC DEVELOPMENT OF THE AMERICAN SEA URCHIN FOLLOWING ILLUMINATION OF GAMETES WITH VISIBLE LIGHT FROM A PHOTOTHERAPY UNIT

Abstract— The unfertilized oocytes and spermatozoa of the American sea urchin ( Arbacia punctulata ) were exposed to phototherapy lights in order to determine the effect of this treatment regimen on post-irradiation fertilization and embryonic development. Light treatment revealed dose-dependent abnormalities in fertilization and subsequent embryonic development.     

Dye-sensitized solar cells based on composite solid polymer electrolytes

The ionic conductivity of polymer electrolytes and their interfacial contact with dye-attached TiO2 particles were enhanced markedly by the addition of amorphous oligomer into polymer electrolytes, resulting in very high overall energy conversion efficiency.     

The arrangement of first- and second-shell water molecules in trivalent aluminum complexes: results from density functional theory and structural crystallography

The structural and energetic features of a variety of gas-phase aluminum ion hydrates containing up to 18 water molecules have been studied computationally using density functional theory. Comparisons are made with experimental data from neutron diffraction studies of aluminum-containing crystal structures listed in the Cambridge Structural Database. Computational studies indicate that the hexahydrated structure Al[H(2)O](6)(3+) (with symmetry T(h)()), in which all six water molecules are located in the innermost coordination shell, is lower in energy than that of Al[H(2)O](5)(3+).[H(2)O], where only five water molecules are in the inner shell and one water molecule is in the second shell. The analogous complex with four water molecules in the inner shell and two in the outer shell undergoes spontaneous proton transfer during the optimization to give [Al[H(2)O](2)[OH](2)](+).[H(3)O(+)](2), which is lower in energy than Al[H(2)O](6)(3+); this finding of H(3)O(+) is consistent with the acidity of concentrated Al(3+) solutions. Since, however, Al[H(2)O](6)(3+) is detected in solutions of Al(3+), additional water molecules are presumed to stabilize the hexa-aquo Al(3+) cation. Three models of a trivalent aluminum ion complex surrounded by a total of 18 water molecules arranged in a first shell containing 6 water molecules and a second shell of 12 water molecules are discussed. We find that a model with S(6) symmetry for which the Al[H(2)O](6)(3+) unit remains essentially octahedral and participates in an integrated hydrogen bonded network with the 12 outer-shell water molecules is lowest in energy. Interactions between the 12 second-shell water molecules and the trivalent aluminum ion in Al[H(2)O](6)(3+) do not appear to be sufficiently strong to orient the dipole moments of these second-shell water molecules toward the Al(3+) ion.     

Variable coordination geometries at the diiron(II) active site of ribonucleotide reductase R2

The R2 subunit of Escherichia coli ribonucleotide reductase contains a dinuclear iron center that generates a catalytically essential stable tyrosyl radical by one electron oxidation of a nearby tyrosine residue. After acquisition of Fe(II) ions by the apo protein, the resulting diiron(II) center reacts with O(2) to initiate formation of the radical. Knowledge of the structure of the reactant diiron(II) form of R2 is a prerequisite for a detailed understanding of the O(2) activation mechanism. Whereas kinetic and spectroscopic studies of the reaction have generally been conducted at pH 7.6 with reactant produced by the addition of Fe(II) ions to the apo protein, the available crystal structures of diferrous R2 have been obtained by chemical or photoreduction of the oxidized diiron(III) protein at pH 5-6. To address this discrepancy, we have generated the diiron(II) states of wildtype R2 (R2-wt), R2-D84E, and R2-D84E/W48F by infusion of Fe(II) ions into crystals of the apo proteins at neutral pH. The structures of diferrous R2-wt and R2-D48E determined from these crystals reveal diiron(II) centers with active site geometries that differ significantly from those observed in either chemically or photoreduced crystals. Structures of R2-wt and R2-D48E/W48F determined at both neutral and low pH are very similar, suggesting that the differences are not due solely to pH effects. The structures of these "ferrous soaked" forms are more consistent with circular dichroism (CD) and magnetic circular dichroism (MCD) spectroscopic data and provide alternate starting points for consideration of possible O(2) activation mechanisms.     

Syntheses of 1beta-methylcarbapenems bearing 5-methyl-4-hydroxypyrrolidinone

A new series of 1beta-methylcarbapenems 1a-d bearing 5-methyl-4-mercaptopyrrolidinone rings has been prepared and evaluated for in vitro antibacterial activity and pharmacokinetic parameters. Most compounds showed excellent antibacterial activity and high stability to dehydropeptidase-1. We have synthesized optically active 5-methyl-4-hydroxypyrrolidinones from enantiomerically pure aziridine esters.     

New synthesis of 3′-deoxypurine nucleosides using samarium(III) iodide complex

Regio- and stereoselective iodinative cleavage of 2′,3′-anhydropurine nucleosides was achieved with samarium diiodide and ethyl bromoacetate to produce the corresponding 3′-iodopurine nucleosides, which were then converted to 3′-deoxypurine nucleosides including the natural product cordycepin.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

New Quaternary Chalcogenides BaLnMQ3 (Ln = Rare Earth or Sc; M = Cu, Ag; Q= S, Se): II. Structure and Property Variation vs Rare-Earth Element

Some new quaternary compounds of the type BaLnMQ₃ (Ln = rare earth or Sc; M = Cu, Ag; Q = S, Se) have been synthesized by the reaction of the constituent binary chalcogenides and elements at 1000°C. The crystal structures of two of these compounds have been determined by single-crystal X-ray diffraction techniques and are isostructural. Crystal data: BaErCuS₃—space group D¹⁷_2h —Cmcm, M= 464.32, Z = 4 , a = 3.987(1), b = 13.377(3), c = 10.101(2) Å (T = 115 K), V = 538.7(4) ų, R_w (F²) = 0.095 for 848 observations and 24 variables, R(F) = 0.037 for 840 observations having F²₀ > 2σ (F²₀); BaYAgSe—space group D¹⁷_2h —Cmcm, M = 571.0, Z = 4, a = 4.239(1), b = 14.030(2), c = 10.636(2) Å (T = 115 K), V = 632.6(2) ų, R_w (F²) = 0.057 for 645 observations and 24 variables, R(F) = 0.023 for 595 observations having F²₀ > 2σ(F²₀). These two compounds adopt the layered KZrCuS₃ structure type. The layers, which are separated by Ba²⁺ ions, consist of edge-sharing octahedral chains and corner-sharing tetrahedral chains. The other compounds synthesized crystallize either with this same structure or with that of β-BaLaCuSe₃, a slightly distorted variation, which is isostructural with Eu₂CuS₃. The diffuse reflective UV-visible spectra of several of these compounds have been measured. From magnetic susceptibility measurements, both BaNdCuS₃ and BaGdCuS₃ show Curie-Weiss behavior, whereas BaCeCuS₃ and BaCeCuSe₃ show in addition temperature-independent paramagnetism.     

Hydrogen peroxide oxidation of di(hydroxo)platinum(II) species in carboxylic acids

A facile procedure for synthesizing the mono(hydroxo)tris(carboxylato)platinum(IV) species has been achieved. The reaction of [Pt^II(OH)₂(dmpda)] (dmpda=2,2-dimethyl-1,3-propanediamine) with a 30% aqueous solution of H₂O₂ in the presence of a carboxylic acid produces a stable [Pt^IV(OOCR)₃(OH)(dmpda)] (R=Me, Et) complex in high yield. The crystal structures of [Pt^IV(OOCMe)₃(OH)(dmpda)] . H₂O (triclinic P1 bar, a=8.761(2) Å, b=9.245(3) Å, c=10.659(2) Å, =106.25(2)°, =93.90(2)°, =98.92(2)°, V=813.1(3) ų, Z=2, R= 0.0474) and [Pt^IV(OOCEt)₃(OH)(dmpda)] (monoclinic P2₁/c, a=12.777(4) Å, b=10.514(2) Å, c=14.971(3) Å, =107.40(2)°, V=1919.2(8) ų, Z=4, R=0.0611) show that the hydroxyl group has been selectively positioned at an axial site. The intramolecular hydrogen bond between the OH and C=O moiety exists (O(H)...=C, 2.83 Å for [Pt^IV(OOCMe)₃(OH)(dmpda)] · H₂O; 2.72 Å for [Pt^IV(OOCEt)₃(OH)(dmpda)]. Formation of the axial-mono(hydroxo)tris(carboxylato)platinum(IV) species may be ascribed to a combination of `reactive-equatorial effects' with `cis-addition' in the carboxylic acid.